1, the heat sink should not be in contact with any acid, alkali or other corrosive nature.

2, should be used after the use of soft and hard water softening treatment, to avoid causing the radiator internal blockage and scale.

3, in the use of antifreeze, in order to avoid corrosion of the radiator, please be sure to use the regular manufacturers and in line with national standards for long-term anti rust antifreeze.

4, in the process of installation of radiator, please do not damage the scattered tropical (film) and scratches radiator, to ensure that the cooling and sealing ability.

5, radiator completely drain and water injection, the engine cylinder drain switch on, water flows out, on and off, thus avoiding to produce blisters.

6, in the daily use should be at any time to check the water level, to stop cooling after adding water. When the water is added, the water tank cover is opened slowly, and the operation personnel should be kept away from the water outlet to prevent the high pressure steam from the water and the water outlet of the water outlet.

7, in the winter to prevent the formation of ice core fracture phenomenon caused, such as indirect long-term parking or parking should be the tank cover and a water discharging switch, all the water out.

8, spare heat sink effective environment should maintain ventilation, dry.

9, depending on the actual situation of the user should be in 1 to 3 months of the radiator for a complete cleaning of the core body. Wash with clear water along the reverse direction.

10, the water level meter should be cleaned every 3 months or as the actual situation, the parts removed with warm water and non corrosive detergent cleaning.